Download your software to start printing
1 Make sure your printer is powered on
2 Select Download to install the recommended printer software to complete setup
Download & Update Drivers
HP Printer Installation & Setup
Fix Offline Printer Issues
Some Simple Steps to Rectify the Error of HP Printer
Blank Page Error
- Check the estimated ink levels.
- Load a plain white paper in the paper tray.
- Touch the minus button (–) next to the setup (wrench) icon on the lower-left corner of the printer’s control panel.
- Touch the Right Arrow button (>) to select Tools, and then touch OK.
- Touch (>) again to select Estimated Ink Levels, and then touch OK. A figure will appear on the printer LCD screen, showing ink levels.
- If any of the ink cartridges are low on ink, see the next step to replace them.
- Load a plain white paper in the input tray, and press the Power button to turn on the printer.
- Open the cartridge door. Wait until the printer turns silent and idle.
- Give a light press to the cartridge to release it. Pull it out.
- Hold the new cartridge by its sides with the nozzles toward the printer. Insert it into its colour-coded slot until it snaps into place automatically.
- Insert the tri-colour cartridge in the left slot and the black cartridge in the right slot.
- Close the cartridge door.
- Now, align your HP printer’s cartridges. Follow the next few steps to do it. Ensure that the printer is turned on and a plain paper is loaded in the input tray.
- Touch the minus button (–) next to the Setup (wrench) icon on the lower-left corner of the printer’s control panel.
- Touch the Right Arrow button (>) to select Tools, and then touch OK.
- Touch the (>) button again to select Align Printer, and then touch OK.
- The printer will print an alignment page.
- Lift the printer lid. Place the alignment page (printed-side down) on the right-front corner of the scanner glass. Follow the engraved guide next to the scanner glass to load the alignment page.
- Close the lid, and then press OK to finish the alignment command.
- Wait until the HP printer scans the alignment sheet and finishes the alignment process.
Easy Way to to Connect Printer
Connection Setup Using USB Cable
- USB cable ports are given that are used to plug-in USB Cable or Ethernet cable in your computer or network router.
- Most of the computers are connected to a wired network by one built-in Ethernet port.
- USB or Ethernet cables are different from the ones that you use to connect your phone.
- Insert both the port of the USB cable in your printer and another on your computer.
- Now follow the on-screen instructions and install the HP printer driver software.
Connection Setup Using Ethernet
- First, ensure that you have an Ethernet cable to support your printer model.
- When selecting the connection type during the installation, make sure you choose Wired Network or Ethernet option.
- So now you need a network router.
- A switch or hub with available Ethernet ports is required if the router doesn’t have any free ports.
- Connect the Ethernet ports with printer and router.
- This will establish the connection between your printer and network router.
Connection Setup Using Wireless Connection
- On your printer touch wireless button
- The blue light will show that it is ON. Now press Settings on-screen of the printer.
- Next, select the Wireless Setup Wizard option and select Yes.
- You need to follow the instructions on the screen.
- The printer will detect the available networks of the router.
- Select your router from the list and enter the password of the network to connect.
- Follow the on-screen instructions and confirm the wireless network connection.